A SIMPLE GUIDE TO YOUR FIRST EXTRACTION
FOREWORD:
The art and process of extracting DMT for your first time can seem a little overwhelming. There are SO many effective teks, so many products and strange ingredients that can be hard to find and not to mention, just the personal opinions of each tek that get thrown around which confuses the information. There’s a million ways to do something and because of that you usually will get a bunch of different opinions on solving a single issue which will leave you, the first timer, confused. I was a new at this once and it was confusing when I had a question and then 20 people get in a comment fight over what the right answer was. For you as the newbie I’m sure you have felt the same pressure and uncertainty. You wanna do it right the first time! All the ingredients took a while and some effort to get yet, some teks and information just have some holes or little questions that weren’t quite addressed in the tek. Well, This tek is super simple and is my go to tek for extracting MHRB. This tek will give you the pure white crystals that vaporize very smooth and will give you the experience you are looking for Not to mention take all of the shop talk out and break it down step by step. Of course we will see comments and opinions on this tek but I promise if you follow this step by step, YOU WILL BE SUCCESSFUL! Lets begin..
LAB SUPPLIES:
A coffee grinder or magic bullet.
A scale that measures in grams.
A bowl to weight out ingredients (can be plastic)
A half gallon mason jar (Mason jars are heat treated so they can withstand the heat)
A pyrex measuring cup that goes up to 4 cups. (Not 100% needed.. you can use a smaller one and double up your measurements. I like the ones with the ML. Measurements on the other side. NEEDS TO BE PYREX)
A wooden spoon with no dyes or chemical treatments that can reach the bottom of your mason jar. You will also need a stainless steel spoon for mixing your lye water.
A digital cooking thermometer. (One from the dollar store works perfect.)
This is not completely necessary but I recommend get a “karter glass beaker set off amazon for 15 bucks. They help measure smaller ML. Quantities. They come in handy I’m more ways than you can imagine.
A glass pipette. This is a must have! It makes the siphoning process accurate and easy. some people have used a glass turkey baster with success but it tends to be inaccurate. turkey basters are the same price as pipette so do yourself a favor and spend the 10 dollars on amazon and get a long glass pipette. it will come in handy for all your future extractions.
A pyrex casserole dish. I use a smaller shallow one but Any size will work but needs to be PYREX.
And last but not least
- plastic wrap
- aluminum foil
- rubber band
- safety glasses
- razor blade
Total for all my supplies was about 70usd however make sure to look at second hand stores first to save money.
THE INGREDIENTS
for this tek we will use,
100g of MHRB (mimosa hostillis root bark) this tek will not work with ACRB as that requires lots of other steps and ingredients.
100g of Sodium Hydroxide (lye) can be found at hardware stores in plumbing section cause it’s used as drain cleaner however I get “red hot devil lye” on Amazon it works great and 2lbs goes for about 16usd.
150ml of naphtha (75ml per 50g mhrb). Also can be found at hardware stores cause its basically paint thinner. Goes for 8usd a can. If you cant get naphtha, Rosenthal’s lighter fluid is the same thing and can be found at 711 and other gas stations. Just look at the ingredients on the back and you will see that its naphtha. You can also use heptane.
750iml tap water ( I prefer spring drinking water. Its up to you and makes no difference)
That is all the ingredients and supplies you will need. Remember that you need to use tempered glass for most of this cause we are dealing with heat and the freezing temps of the freezer.
THE TEK
Put 750ml tap water in your pyrex measuring cup. This is where a measuring cup with ML. Measurements comes in handy. make sure it pyrex!
while stiring the water with your stainless steel spoon, add your lye slowly to the water. About a tablespoon or so at a time. Keep stiring as you add the lye so it doesnt stick to the bottom and stir until all 100g of lye is dissolved in your water. Do this step slowly you don’t wanna overheat your glass to fast. You don’t use a wooden spoon for this step because you don’t want any dyes or treatments that are on the spoon to leach out in your lye.
Allow for the lye water to cool to room temp or 70 degrees. Check it with your thermometer! Lye causes a reaction and the water will heat up really hot that’s why the measuring cup needs to be a pyrex cup. The trick to getting white crystals is to not absorb any plant fats by adding to much heat that’s why everything in this tek is at room temperature. SIDE NOTE: this is where personal preference comes in. Some people say they like fatty or “yellow orange” dmt and others like the pure white smooth stuff. Its all up to you as you gain more exp. But for this tek we are extracting pure white spice.
while your lye water is cooling, grind up all 100g of your MHRB in your coffee grinder until its powdered. I grind up little pinches at a time as to not clog up my grinder. It doesn’t have to be perfectly powered just break it down as much as you can. The finer the better!
Take out your half gallon mason jar and Place all of your ground up MHRB in the jar. (Wide mouth mason jars are nice so you can pour everything in easily)
Once your lye has cooled to room temp or (70 degrees Fahrenheit) pour it into your mason jar and stir it with your wooden spoon until you have fully mixed your powder into it. Make sure to stir it well and leave no clumps. Let the jar rest for 10 minutes and you will notice any dry bark has floated to the top. Give it a good mix again with your wooden spoon and let it rest another 10 minutes. Repeat this mixing and waiting process until no dry bark is present. Usually takes about 3 solid mixes over 30 minutes. You need to make sure the bark is fully saturated because if you add the naphtha while there is still dry bark it will cause instant emultions. Be patient and be through. After about 30 minutes or 3 mixes you will notice the bark mixture has turned black. This is the lye eating at the bark, and breaking the bark down, releasing the alkaloids you’re after. Make sure you wear safety glasses when mixing the lye water and when pouring it Into your bark. Don’t get it on your hands, clothes or in your eyes. That Would not be good.
after you have thoroughly mixed your lye water into your bark and made sure there are no dry clumps. measure out 150ml of ROOM TEMP NAPHTHA in your glass measuring cup (or karter beaker if you bought a set). make sure it is room temperature. We don’t need heat for this tek. It pulls out to many plant fats and leaves you with harsh yellow or red dmt. Also not good (in my opinion)
Pour the room temp naphtha into your mason jar with the bark solution.
Cover your mason jar with plastic wrap and secure it with a rubber band. We don’t use the lid for this cause if pressure builds it will shatter the jar. That’s why you use the plastic wrap and rubber band.
Grab the jar from the top and lightly SWIRL it around until the 2 layers become 1. Take your time and don’t shake it hard. Mix as hard as you need to in order to get the layers to mix. just don’t violently shake the jar. If you mix it up to rough you will get what’s called emulsions ( emulsions are tiny pieces of your bark layer that become trapped in your naphtha which are really hard to get out and leave you with harsh and dirty spice) So take your time and slowly swirl the jar until the 2 layers mix. Take as long as you need. roughly 30sec to 1 min is usually all it takes to mix the layers.
11th) repeat this mixing process every 4 to 6hrs for the next 24hrs. Mix it up, let it sit, mix it up, let it sit. This gives the naphtha time to pull all the alkaloids from the bark in a single pull. (The problem I see with a lot of teks is over complication of this part. They pull their naphtha in and out of the jar 3 to 4 times to get all the spice but only let their naphtha sit in the jar for a hour. Don’t do this! Give your naphtha a full 24hrs to work the bark while mixing the 2 layers every 4 to 6 hours. If you do this you will get all of your spice in 1 single pull and save yourself a lot of time and unnecessary transfers.)
After 24hrs and the 2 layers have separated for the last time, remove the plastic off your jar and get your pipette or turkey baster.
Siphon off the naphtha layer at the top of the jar into your pyrex casserole dish.( BE CAREFUL AND DONT SUCK UP ANY OF THE BOTTOM BLACK LAYER WITH YOUR NAPHTHA) You will notice the naphtha is yellow. This is all the spice in your naphtha.
after all your naphtha is out or your mason jar and in your casserole dish cover the dish with aluminum foil tightly and place it in your freezer (we cover it so your naphtha doesn’t evaporate in your freezer and leave you with weird tasting food) Leave it in your freezer for 24hrs. After putting it in the freezer cover your mason jar back up with the plastic again and set it off to the side for now.
After 24hr remove your dish from the freezer. Remove the foil and you will see all your Crystal’s stuck to the dish. Take an empty glass beaker or glass cup and pour the naphtha from your casserole dish into the glass cup an careful not to pour any dmt Crystal’s with it.
Place your casserole dish upside down, leaned up against a wall, in a ventilated area to allow your spice to dry and the remaining naphtha to evaporate. Don’t worry! your crystals will not fall out. I personally leave mine propped up against a wall upside-down for about 4 to 5 hours with a towel underneath to soak up any remaining naphtha that drips off my dish. A easy way to determine if its done drying is the inside and outside of your casserole dish will be completely dry.
The naphtha you poured into your cup out of the pyrex dish you can warm back up to room temp and pour back into your mason jar and repeat the process for 24hr to try and pull more spice from the bark. However I find this to be unnecessary. By giving our naphtha a full 24hrs in our solution the first time, it was able to get all the spice in a single pull. You’re welcome to try however, I’ve never got anything on a second pull with this tek.
This tek is very simple and with the measurements I gave you, you should extract 1 to 1.5g of pure white spice.
- Once your crystals dry scrape them out of your dish with a razor and don’t touch them with your fingers because your body heat alone can melt them. keep them in a airtight bottle in a dark dry place until your ready to vaporize. Keep them away from light and air as dmt oxidizes. A little bottle in your sock drawer is a perfect spot.
CONCLUSION
I hope this helped clear up a lot of confusion for the new guys and girls wanting to do their own extractions. Like I said there are a million ways to do an extraction. There’s a lot of personal preferences and opinions out there but this tek is very easy for a beginner to follow and will leave you with great high quality spice that’s sure to bring an even higher quality experience. If you follow this you WILL be successful.
Thank you and best of luck to you all! PLEASE visit my profile to see the new updated version of this tek. It’s called spiritveghead tek and its in 4 parts. Part 1 is the new tek. Part 2 is supplies and ingredients with product links. Part 3 is a re-x tek and evap test. Part 4 is a updated FAQ section.
PLEASE READ THE FAQ SECTION BEFORE MESSAGING ME WITH ANY QUESTIONS. I’VE DONE MY VERY BEST TO RESPOND TO EVERY SINGLE QUESTION AND COMMENT HOWEVER, ITS HARD TO KEEP UP IN A TIMELY MANNER. BELOW IS A LIST OF QUESTIONS I GET ALL THE TIME AND FIGURED I CAN ANSWER THEM HERE AT THE END OF THE TEK. LETS BEGIN….
FAQ
- “My naphtha isn’t mixing into the solution should I mix harder?”
A. YES. Mix and swirl the jar as hard as you need to to get the layers to mix. I usually swirl the jar pretty hard and fast. You just don’t wanna shake the jar and get a bunch of air bubbles in the solution. The naphtha will start to separate almost immediately and that’s perfectly fine because we are giving the naphtha a full 24hr in the solution. So just mix as hard as you need just don’t violently shake the jar or mix with a spoon or stick.
- “Can I buy pre powdered bark or do I have to use whole bark and grind it myself?”
A. YES. You can use pre-powdered and get the same results. The reason I buy whole bark and grind it myself is personal preference. I like being apart of every step. I put on some good music, grab a cold drink and have a grinding session. I like to put lots of positive vibes and love into every step. Grinding the bark is fun and I just feel like the more work you put in the better your results will be. I’ve also noticed that buying bark pre-powdered is more expensive. Whole bark tends to be cheaper then the powdered because the company didn’t have grind it up. So keep that in mind.
- “Can I do this tek with larger amounts of bark?”
A. YES. This tek is for 100g of bark however if you wanted to do 200g of bark you would just double all your ingredients.
- “What vaporizer do you use to partake?”
A. I personally use a 3 coiled vaporizer called the “Ionix”. Its made by gravlabs. Cost about $80 USD and is my favorite method of consumption. Its a 3 coiled vaporizer that allows you to fire each coil individually or all together which comes in handy when sharing with friends. I DO NOT RECOMMEND OR USE A OIL BURNER (crackpipe). When smoking you loose your motor skills very quick and the last thing you wanna be dicking with is a hot glass pipe and a lighter. Its better to have everything at the push of a button while reality is melting around you.
- “I work long hours. Can I leave the dish in the freezer longer then 24hrs?”
A. YES. Your spice will be perfectly fine in the freezer until you can get to them. Just make sure to leave them in there no less then 24hrs.
ONCE AGAIN THANK YOU ALL VERY MUCH FOR THE POSTIVE WORDS AND FEED BACK. ITS BEEN AMAZING HELPING EVERYONE IN THE GROUP AND BEING APART OF THE SUCESS THAT A LOT OF FIRST TIMERS HAVE HAD WITH THIS TEK. ITS TRULY A BLESSING. IF I DIDN’T ANSWER ANY OF YOUR QUESTIONS HERE PLEASE FEEL FREE TO MESSAGE ME AND ILL HELP ANY WAY I CAN.
Absolutely! After breaking through a few times I came to the realization that I need to do my part to help the newer people. I was really confused when I started until I ran into one person named willy-myco he walked me through it and thanks to him I had my first successful extraction. Figured since I have everything down it was time to pay it forward and just put this out there incase someone was lost. Never hurts to share information even if you can find other versions of it out there. Everyone learns and reads differently then others so I put it all down in a way that was more organized and easy for me to understand. Hope it helps and if you have any questions shoot me a DM!
3
Willy-Myco has good info, I just got my first successful extraction with Chris Cantelmo using MHRB. Technically my first was ACRB with a mini a/b at the end, I extracted very very little of very very pure white crystal. Any experience with using Acacia? I’m definitely going to try this tek next for the MHRB! Do your crystals stay fluffy and in crystal form or turn cloudy while drying?
4
Op
So acrb extracting is a completely different process. It requires different solutions and usually has a few more steps involved. Ive done quite a bit of acrb extracting however always loved how simple mhrb was. Less supplies and time are needed and you get the same mind blowing product in the end. My crystals always stay white and fluffy. Ive never had them turn into another form or color unless I stored them wrong.
5
Thank you! I’m definitely trying less heat on my next and definitely hoping for less yellow (even though it’s a very pale yellow with heat and salt……do you have any special tek recommendations for acrb!?
6
Op
Absolutely! So I would go to thevlogs.com and search willy myco. He has a step by step acrb extraction video. that is the tek I use for all my acrb👍
7
💚
6
Sort by the extraction tek flair on this sub and you’ll find KemFun’s 4 hour ACRB tek. Really good stuff.
7
All this info, thank you! I’m stoked! I got acrb from 2 different places the first one I tried with barely any yeild on 100g….. I’m going to try the other source and see if yields better…..then try the first again. ( I got mhrb too and after success gotta touch on the pesky acrb again haha)
3
How much spice yields from this tek
1
Me and roommates followed this for first time and we just added the naptha to the casserole dish. 10 minutes later pulled the dish out of the freezer and saw crystals thank you thank you a billion times thank you I love you
2
Op
Absolutely! Way to go on you’re fist extraction! You now have the power to access these higher dimensions any time you want! Mother nature is the best dealer!
3
Do you reccomend the MHRB to be powdered or shredded? I’m looking into buying the bark atm and I see they have a powdered option
1
__
Just did this as my first, dead simple, grateful to the OP for her kindness in sharing.
Ended up with 0.565mg yield from 50g MHRB, I will still try to see if there’s anything left for the second pull, even if I get none, I am very happy. Thank you all for this community 🙏🏻
2
Awesome! Sorry it took me so long to respond I must have missed this in all my message and comment notifications. I’m very happy and excited to hear that it helped you get to a successful extraction! Thats amazing and since you put in all the work to extract it yourself and learned the process, I’m sure you will have an amazing experience with the molecule! Great work! Keep going and exploring in this dimension and the otheres😉
1
Really detailed and amazing guide! Im planning on extracting soon for the first time and I’m going to use this guide for sure! Thank you for taking the time to write this!
2
Absolutely! I’m glad it helped you. Some people thought it was to detailed for a simple tek but when i first started i felt it was the missing details that confused me. So I wanted to write a clear and easy to understand step by step guide. Quite a few people have said it helped them and that they successfully completed their first extraction. This is my favorite tek. Its simple easy and gives you great results especially for a first timer. Good luck! If you have any questions just shoot em my way!
3
There doesn’t exist something as too detailed, especially for a beginner. Everything you need to know and explained clearly in 1 post is a dream!
2
hey bro u ever try this? how did it go?
1
Thank you so much
2
Op
You bet! hope it clears the air on some details and makes the process easier for ya😉
1
I have done DMT four times prior to this next upcoming trip an never have blasted off. Long story short the last trip I nearly did, or so I think I did. But I came out of it with this crazy strong conviction something was telling me I had to do the work myself, show them the love they deserve by taking the time and effort to extract my own instead of submitting to old habits and buying from a dealer. I used this tek to the letter with only one small variation, I split the recipe down the middle and between two quart Mason jars. I just scraped and got 2.24g. I am going to make a cart, and attempt my first blast off. Once I do so, I’m going to make an extraction and trip report post all in one. Thank you so much guys, a new chapter begins today.
Peace, love, and all that other hippie stuff,
☮💜🍄PAZUZU🍄💜☮
2
Op
Awesome dude! It’s very satisfying to put the work in yourself. You definitely get more out of it. Not to mention learning the process will allow you to access the molecule anytime you need to. Happy holidays and safe travels🌈🍄
1
So the salt and vinegar and hot water isn’t necessary? What’s the point of the acid to base extraction? Just curious
2
I’m curious about this as well. I’ve always used A/B extraction for mhrb powder.
3
I’m curious too
2
Following
1
Yo you are a freaking legend for this. I just got done syphoning the naphtha and it’s in the freezer now. I’ve never felt so confident in attempting sumthing I’ve never done before, especially considering it’s like science stuff lmao. I’m so grateful for you I almost want to cry, not even joking 😂 I’m giving u a million internet hugs 🤗 I’ll post the final result tomorrow when it’s done!!
2
Op
Thank you so much for the kind words! I really appreciate the internet hugz🍄 I can’t wait to see your results! Keep us posted!
3
How can I send you a picture of my final product?? I can’t even believe I made this myself 🤯🤯 you are a legend for this omg ❤️
1
such a nice guide. I’m going for my second extraction ever very soon and this is going to be the tek :D Thanks!
2
Op
You’re welcome! Glad its helping a few people. Hopefully it was simple enough to read and follow. If you have any questions just shoot me a DM and I can walk ya through it.🙂
1
Extraction Cub
Huge props for keeping this thread so alive.
I’ve just started my first attempt, I’m wondering is there any reason why you couldn’t swirl the jar more than every 4-6hrs to keep the two liquids mixed together for more time?
Thanks!
2
Op
hey thanks! you absolutely can mix more. i just put 4 to 6 hours a a guideline of minimum times you should mix.
1
I just follow OP tek. I get almost 2 percent yield that is white n fluffy. This imo is the easiest tek to follow with high yields and pure product.
1
If I want to do a 50g extraction should I change the ratio of ingredients? Originally I halved everything and the yield wasn’t great. But the feeling of blasting off on your own product is amazing!
2
Op
Absolutely just cut everything in half and if you wanna do bigger quantities double or triple them🙂
1
[deleted]
Best guide I’ve seen, thank you so much 🙏🙏
__Reply
2
Op
You’re very welcome. I was a beginner once and just straightforward information is hard to get ironically. Hope it helps!
1
Thanks very much! First time and id call it a success.
1
I’m using gum arabic tree because that’s available here. How much do you think I can get from 100gs of that?
2
Op
To be completely honest I don’t even know what that is and have no idea if it will extract the same way as mimosa hostilis. Mimosa hostilis is widely available from a variety of good vendors that ship everywhere so id suggest waiting till you get mhrb however if you go through with your gum tree bark please let me know how it turns out because I’d love to hear and see the results🙂
1
What’s the best way to smoke it after you have the product recrystallized completely? I’ve heard some people mix it with cape juice, and I don’t really want to mix it with weed. I’ve got a very low THC tolerance and I would prefer a pure DMT experience
2
I strongly recommend dabbing it.
3
I don’t have a dab rig and I haven’t smoked weed in years. Would you still recommend doing it this way? I’d rather not buy a dab rig
4
Op
So you 100% want to vape the pure crystal. I use a rig called a inonx dab rig. Its made by gravlabs. Its simple to use and has always given me a breakthrough. It cost about 80 bucks but there are cheaper options. I never preferred putting it on weed. You’re going to want between 40 to 60mg loaded into a vape of some kind. Take a look at YouTube at some of the other options you can use.
5
Awesome, I’ll look into that. Thank so much!
1
Extraction Cub
Does starting stink up a room by any chance?or am I clear to start it my room?
1
Could you kindly add to the FAQ section what to do with the bark mixture post extraction? Not too sure what to do with this and I’m sure others might have the same question.
2
Op
Sure no problem. The simple guide is going to be deleted soon. I have been working on a new updated version of what’s now called “spiritveghead Tek” that will be more user friendly with photos, links to the products I use and a link to a guided video extraction to pair with the written tek. I’ll be sure to add your suggestion in the FAQ on the new tek post. In the mean what I usually do with my soup is after I remove the naphtha I flush it down the toilet. Its just bark and drain cleaner. Then with my spent naphtha I put it in camping full Gas can or lighter fluid bottle and use it to start my BBQ. Super simple. The jar washes out very easy as well.
3
Your guide couldn’t be any simpler! Thanks again for your efforts and contribution to this community, err family ;)
3
Comment deleted by user
1
Thank you so much. I don’t know anything about extraction but you made me feel confident I am not going to waste my time or money. On a different note. Would you say that consuming DMT has some of the same positive effects as psilocybin? Do you source your root from the U.S. or internationally? Do you need a special pipe? If so, what kind? Sorry for all the questions. I don’t really know all the ins and outs of Reddit so if there is an easier way to connect with me, please do. Again, thank you!
2
Op
No problem ill shoot you a dm because we’re not allowed to discuss certain things in the group.
1
Post saved. Thank you.
2
Op
No problem hopefully it clears the air a bit and makes everything a bit more straightforward without all the lingo😉
1
can this exact tek be followed with pickling lime instead of lye?
2
No it can’t because CaOH is not water soluble.
3
right on thank u
2
Op
Honestly I can’t speak to that. I’ve never tried it that way but however might be a fun experiment to try on a small controlled scale. Lye is very easy to get However im always up for learning alternatives. If it works out please share the results. I’m sure lots of us would like to hear about it. Thanks again!
1
How much bigger the equipment has to be if say i want to do 500 to 1kg bulk pulls. And thank you for the details this the best i have seen yet.
2
Op
First off, thank you i took my time writing it out over a few extractions. I felt there needed to be a super easy to comprehend written tek. So many teks just have vague details that leave alot of questions. So as for doing mass quantities like that there are some options like
Double the amount of jars you use. Ive fit 200g runs in a single half gallon jar. So if you’re going to do 500g then I’d put 250g in 2 jars.
Id highly recommend if you’re going to do large quantities that you have a bunch of smaller controlled jars. Last thing you want is a giant 1kg barrel and something go wrong and you loose it all. Its better to loose 1 of your 5 half gallon jars then it is to loose it all in a giant jar.
Also I wouldn’t encourage a huge run like that. Dmt oxidizes when exposed to air and light and having a huge quantity like that would go bad before you could use it all. 1.5g is alot! At least 30 breakthrough experiences. Anytime i made a batch it took at least a month before it was gone and that was with me sharing it with all my friends and their friends and my friends friends.
In my opinion its better to make fresh batches when you need em verses making it all at once. It will loose potency overtime. However maybe you already have a few people wanting it so I’d stick with no more then 250g per jar and just run a few jars. Start them all at the same time and when it comes to pulling your naphtha from each jar then you throw all the naphtha from each jar into one casserole dish to freeze.
Hope that helps. I used to want to do that too until something happened to a 800g jar and I had to get rid of it all. I’ll never make that mistake again lol.
3
How long would you say it lasts? I’m also wondering what do you use to clean the jars / equipment before and in-between? Just soap and water okay with air dry?
4
Op
Clean-up is really simple just warm water and soap. And prepping the jars the same way. Since we’re working with potent chemicals we don’t have to worry about molds and contamination. As for how long it lasts it really depends on how you store it. Ive never have my spice go bad. I keep mine it in a cool dark air tight place. A bottle in a sock drawer is perfectly fine.
1
[deleted]
Would you recommend lazymans tek?
__Reply
2
Op
To be honest I’ve never tried it. After viewing the tech I’m just not in to doing it fast like that. Just seems sloppy to me. I like to take the time to put the love into it. I feel it just makes my outcome better. But just my opinion. Also I’m not into using big batches of bark like that. One time I did a big batch and something went wrong and I lost it all. Lesson learned. Got greedy lol. From then on I never tried to extract more then I needed and kept my runs to smaller controlled jars.
1
Comment removed by moderator
2
Op
I do plan on a video tutorial soon. I have the gear just need to find the time. Are you not allowed to order mhrb in 🇨🇦? Or do you just not know where to buy it?
3
To be honest i have no clue ive heard stories of people getting busted for buying mrhb so I have no idea. But I also heard that shredded barknis fine but problem lies in powderd form. Ans I’ve just located a source that sells 1kg for $300.
Its a lot of hit and miss information so I get lost 😔
4
Op
Hey shoot me a DM!
1
U started w 100grs of MHRB but only added 75mls Naptha which is for 50grs MHRB so didn’t u mean add 150mls of Naptha in above 100gr recipe? 😊
150mls Naptha seems about right….
2
Op
Since its a 100g recipe you add 75ml of naphtha per 50g of bark. So 150ml for 100g of bark.
1
great tek thank you, it really covers all the silly blindspots that you have as a noob.
Would you recommend this tek for acacia? have you tried it with acacia? if you dont recommend what simple tek do you recommend for acacia?
2
Op
So this tek will not work with acrb. Acrb is an entirely different process that requires different ingredients. The tek ive always used you can find at thevlogs.com. go there and look up willy myco. He has a step by step video tutorial on acrb extracting thats easy to follow.
1
I am currently following this tek to the t, it will be my third tek
this week.
Hopefully this one goes well.
Currently I am at the step where I every 4-6th hour stirr the jug with
125 ml (was short) of Naptha at the same time I am allowing two batches
with naptha evaporate.
If this goes well I am considering using the rest of my MRHB for this purpose.
2
Op
Awesome! I’m glad to hear it! I’ve always froze pacipitated mine instead of evap but im sure you should get the same results. Let me know how the color comes out on that. Maybe post a picture to the group with a review of the tek or something. Best wishes🙂
1
Thanks for the very nicely detailed (IMO) guide. All I’ve heard is bad things of lye and lime, lime , lime. I’m not knocking anything as I am new to this culinary skill but I’ve been looking for a good tek with lye bc I already happened to have some. I’m gonna get to work on my project hopefully over the weekend and of course will post up the results, that I will obtain lol. Thanks again, for an easy to follow guide without having to waist time on multiple pulls (again not knocking one way or another but my preference as of now will be to try and get the most outta one pull). Also thanks for answering everyone’s questions as it may of answered one or two of mine (not really bc your FAQ section answered most) Glad to be a part of this community
2
Op
Awesome! I Wish you sucess and if any questions pop up along the way feel free to ask👍 glad to have you in the community!
1
Thanks for this going to try this one out ❤️
2
Op
Absolutely! Best wishes! if any questions arise, feel free to shoot em my way👍
3
Why specifically wooden spoon?
4
Op
__
A couple reasons but the main one being you don’t want to accidentally Crack your jar while mixing. Also metals and lye don’t mix. Especially aluminum. It will corrode the metal and you dont want any of that released into your extraction vessel and work its way into your final product. You could use stainless steal but that would bring you back to the first issue of potentially cracking the jar.
5
Awesome thanks so much!!
4
A glass rod will also work. Lye reacts with many metals so that’s why you don’t want to use a metal spoon or stirrer.
1
Is there any need for PH testing in this extraction method? If so where? (sorry this will be my first go)
2
Op
No ph testing required at all. Ive tried it with all kinds of brands and types of water and the outcome is always the same. Only variations I’ve ever encountered were determined by the quality of bark used.
1
Comment deleted by user
2
Op
Sure you can do that. I just prefer adding the lye water to the jar of powder for 2 reasons. Reason one is because when mixing the lye in the water, pieces of lye will stick to the bottom and you need to be able to mix them up without it sticking to the bottom because it will cause heat to build up in a concentrated area which can shatter and weaken your glass. The second reason is because trying to mix and scrape the pices of lye can cause you to hit the side of you’re jar too hard and break it. Its also difficult trying to reach lye stuck to the bottom of a half gallon mason jar then it is a measuring cup. I prefer to mix the lye water separately instead of the jar ill be doing my extraction in because I don’t want to weaken that glass. It’s better to let that heat and chemical reaction of the lye unfold in a jar other then your extraction vessel. So you can add the bark to your lye water however I just prefer using a thicker, stronger measuring cup to contain that chemical reaction and let it cool before adding it to my extraction vessel. I’d rather use one extra cup that is easy to clean then weaken my jar just cause I didn’t want to use one more glass. You will get more life out of your jar. However it won’t make any difference in the final product how you mix them.
1
Hello I am a beginner my first extraction I harvested a meager 0.25 G I want to try a second time if I can use xylene instead of naphtha I find that it smells better and my second question: do you have a method for infused with herb ex: peppermint and thank you for creating such a rewarding forum
2
Op
Yes that is a pretty low yield That is likely due to low quality bark.. I would recommend checking out r/dimitrisgarden. It’s a list of vendors and a review of each. another reason you might have got a low yield is due to not thoroughly mixing the 2 layers completely. In the future i would recommend that if you haven’t retrieved a 1% yeild back on your bark (100g of bark = 1g of spice) do a second pull on the bark. If you get nothing on the second pull you know for sure its the bark quality. As for xylene, I really don’t recommend it. First of all, it smells as well. You ever see a sharpie marker that says xylene free on the side? There’s a reason for that. Another reason xylene is a bad choice is because it doesn’t target dmt as well as naphtha does. Xylene pulls out way too many other alkaloids. Naphtha targets spice specifically unlike xylene that just pulls whatever is soluble in it. You would have to do a lot of clean up steps that would ultimately lead to you using naphtha anyway. Another reason xylene isn’t preferred is because it will not freeze participate the spice. It would have to be naturally evaporated which takes a few days. All in all it’s a very poor choice for solvent that causes a lot of unessasary work with little pay off. I recommend sticking with naphtha. Perform an evap test on your naphtha and once it passes, your good to go. As for my method for infused, you will need
1 gram of spice, 1 gram of your chosen herb, A small mason jar or beaker and a Pot
Place your chosen herb in you glass beaker or mason jar. Then sprinkle you dmt over the top of your herb. Don’t mix it just let it sit on top. Cover your jar over with some plastic wrap and seal it well. Put some water in your pot and bring it up to a boil. Once it reaches a boil turn off the heat. Then place your jar or beaker into the water giving your jar a hot water bath. Allow the the dmt to fully melt into your herb (about 7 to 8 minutes). Once it’s completely melted remove the jar from the hot water, remove the plastic wrap and stir up the herb with a spoon or chopstick to fully coat the herb. Once it’s mixed you need to cool it off so the spice can recrystalize. Place it in your freezer or about 30 minutes then your changa is ready for use. I recommend 100mg to 120mg to start and scale it up from there.
Hope this helped! Best of luck🍄
3
merci
1
Thank you so much!! This is the best I’ve read so far and much more comfortable not using heat. Do you purify after?
2
yes
2
Did you get white crystals? Im asking for a friend.
1
Thanks so much for the guide! Is it ok to use zippos lighter fluid instead of naphtha ?
2
yes as long as the lighter fluid still contains naphtha, ronsonol lighter fluid, zippo, you can find them at a 711
1
Comment deleted by user
2
keep it room temp if you can, close window and just put it under a ceiling fan or any other fan with the pan propped up against something so any remaining naphtha can dry
1
Hey! So I’m about to try this Tek. And I am super grateful, all other guides have been so long and complicated, and I’m already scared shitless for actually trying DMT so lol. I can’t figure out how to hang a pyrex casserole dish upside down leaned against a wall. Sounds DIY like to me, or maybe I just can’t wrap my head around it. Anyway, could you break that down for me? Lol
2
Op
No problem! So we turn the dish upside-down so that any excess naphtha can run off of the crystals and allow them to dry. They crystals stay stuck to the dish so they won’t fall out. I usually place a layer of paper towels on my counter and then lean the dish with the crystals facing down, aginst the wall then I allow them to dry. A good way to tell that the crystals are dry is the smell of naphtha will be gone and the Condensation on the outside of the dish from the freezer will also be dry. This step is very simple and for now I would more focus your attention on gathering all you supplies to do the extraction. I’ll be happy to help you along the way anytime until you are successful. Take your time and do lots of reaserch before diving in. Best wishes 👍
1
Extraction Cub
Currently in the mix and wait phase of this Tek everything is going smoothly thank you for posting this. Wish I had waited on the half gallon mason jar the jar I used was just barely enough to hold everything so mixing it up has been difficult but that was on me.
2
Extraction Cub
I guess that raises a question is there any reason I shouldn’t/couldn’t pour the solution in the larger jar and continue to mix a little longer than the 24 hrs?
3
Op
Yes you absolutely can do that👍
1
Thank you.
1
So stupid question I’m new to all this. I’ve been taking mushrooms for years but never DMT. When using naphtha to extract, is it possible that you’re smoking the naphtha still remaining in the crystals?
2
Op
This can happen if you don’t test the purity of your naphtha before use. To test the purity, you perform what’s called a “evap test” or “evaporation test”. you place a few drops of naphtha from your bottle into a shot glass. allow the naphtha to naturally evaporate over a few hours. once its fully evaporated the glass should be clean with no residues or goo. If the glass is clean and clear then it is safe to use without worrying about it being in your final product.
3
I never thought of that. This is much different than mushrooms lol I grow and can clone and take spore prints and keep a genetic family going for awhile through agar. But all this seems completely alien to me lol
4
Op
If you can grow mushrooms you can 100% do this. Mushrooms take a lot of patience and sterile techniques. This is basically just an extraction. You could compare it to a liquid psilocybin extraction. Using grain alcohol to extract the active compounds in mushrooms. With this its the same thing accept you’re using different ingredients to target a certain molecule. Shoot me a dm some time man and I’d be happy to go in depth with ya👍
5
Hell ya man I’ll have to take you up on that! Thanks!
1
I bought a pH meter because I was going to follow a different tek, but came across this one and decided to use it for my first go at this.
Is there any reason to use a pH meter in this tek? Just curious considering I have it. This may be a foolish question, my knowledge is minimum.
2
Op
No problem at all. So your water after adding the lye needs to be a ph of 14 which is highly alkaline. However we don’t use a ph reader in the tek because the tek uses 100g of lye which is enough to be certain the water is a ph of 14. If you really want to try that meter then I have an experiment for you to try. Lately I’ve learned from a few other mods in the group that the water could reach a ph of 14 with way less lye then 100g. I’m curious how much lye it takes to get 750ml of distilled water to a ph of 14. If you conduct this experiment please let me know the results as I’m between ph meters right now lol. Ask for following the tek I can assure you that you won’t need it. Best wishes my friend! Keep learning and asking questions. It’s how we grow and learn better, safer ways to get the desired outcome. Keep me posted!🌈🍄
3
Thank you a whole bunch for the quick and detailed response. I really appreciate it! I’m excited to expand my knowledge and learn more about extraction and chemistry in general. I will conduct that experiment and let you know tomorrow.
I’m intending to treat the whole process of extraction and making the changa with conscious awareness as part of the journey as a whole. I could imagine there is a bit more intimacy with the substance, and since I hope it to be I’m sure it will 😁
Thanks again, you the best.
4
Op
It’s a powerful journey and one you will always remember. I’m glad I could help you! I hope to see another successful extraction post by you soon my friend! If any questions arise don’t hesitate to ask me or the group. There are a lot of kind and knowledgeable people here that are willing to help all beginners. We were all there once. Best of luck! Take your time and DONT RUSH ANYTHING! I’ve seen some beginners buy the wrong ingredients (mainly lye choice) and because they are tired of looking for it they end up on settling with something that is dangerous. If you’re not sure of something then ask before you buy. It usually doesn’t take me longer then a day to reply. I check and answer my dm’s and comments once a day and I’d be happy to share my resources with you. Gathering supplies and ingredients is tedious and time consuming especially for your first time because you don’t know where to find things. So be prepared for that! But I promise if you take the time to get the proper tools and supplies you will have an amazing first extraction that is well worth the wait. Do it right the first time and don’t cut corners. AND PLEASE PLEASE PLEASE WEAR YOUR SAFETY GEAR! Don’t skip them. It’s the most important supply of all! There have been times that I was very thankful I had safety glasses and gloves on especially when I was first learning. So Please, for fuck sake, take the 30 seconds to put on your safety gear. These chemicals will show no mercy if you treat them carelessly. I wish you all the success in the world and please be safe and ask as many questions as you need to, to feel confident when it comes time to conduct your extraction. 🌈🍄
5
__
Just took my first pull out of the freezer and it is absolutely covered in crystals. I’m excited to scrape. Thank you SO much!
I noticed two small yellow pieces in the dish. Is that just spice too, or did I go wrong somewhere?
6
Op
No you didn’t do anything wrong that is just the spice taking a different form. Perfectly safe to use. I would also recommend a re-x after drying a scrapping. Great work my friend! I’m glad the tek helped bring you success 🌈🍄
7
Thank you spirit! You da best
1
[deleted]
Got a favorite, durable half gallon mason jar you use? I see some conflicting narratives on their resistance to thermal shock and I don’t want to risk lye exploding in my kitchen lmao
__Reply
2
Op
They are perfectly safe to use. Also they shouldn’t be encountering any thermal shock. Your lye water is mixed in my pyrex measuring cup and allowed to cool before adding to you mason jar.
1
I need an easy step by step like this to re-x or clean it, whatever its called.
2
Op
No problem I’ll shoot ya a dm👍
1
the entire time? Will the naptha moving keep the it from precipitating or anything? Not talking about waves or anything, just light rocking occasionally.
2
Op
I assume this means you’re in a rv. I personally would be more worried about it spilling over the edge of the dish from the motion. You can also use a tempered glass jar like a small mason jar or beaker. This will prevent it from spilling over during motion. Your crystals will still precipitate fine👍
3
Thanks! What’s the approximate volume of liquid you end up siphoning into the casserole dish?
4
Op
Around 130 to 140ml of Naphtha depending on how much you were able to Siphon without getting base. There will always be a thin layer of naphtha left in your jar which is okay. When you add 75ml of naphtha back to your jar for a second pull, whatever spice was left in that thin naphtha layer will come out in the second pull. You can keep repeating the mixing and pulling process until nothing precipitates in your dish.
1
Yo brother, just wanted to say thanks, used this tech to great success. Have not weighed yet, but I’ll report back. Still drying, but looks to be about a gram.
Weight of pull was 1.45 g, was a little gassy/wet, so may lose some as more nap evaporates. https://imgur.com/a/Kk6HXof
1
Thank you!
2
Op
Anytime! Best of luck to you and safe travels 🌈🍄
3
Wanna try my first expericene with dmt with my self made dmt :) will give it a try next month or so at the moment i am searching for the right materials because i live in germany and for example the naptha everybody use i cant get…also must read more here and find time for it. Love you all
4
Op
Take your time brother. Research as much as you can. Also please send me a Direct message when you find your solvent as I’m curious what is available to you over there👍
1
I’m gonna be siphoning off the naphtha later tonight. So excited for my first extraction! All thanks to this tek!
1
Extraction Cub
I’d like to add the importance that pyrex (lowercase) is sodalime glass and is not the same as PYREX ( all caps )
2
Op
This is true however I have used both forms of them without issues. The temps never get extreme enough for the glass to break. So either or will do👍
1
didnt understand the wall part can you do a video just for me and PM it to me thankssss dont wanna fuck up my powderrrrrr 👩🏻🔬👩🏻🔬👩🏻🔬👩🏻🔬👩🏻🔬
1
So no heat is used at all during extraction? Sorry if I’m not following correctly. Absolutely newbie here. Any advice would be much appreciated 🙏
1
Thanks for the details!
I have a couple of questions.
Any issue using a smaller (1l) mason jar? It’s going to be nearly full (825ml) but does that cause any issue?
Also, would any mason jar work, like even the $2 ones? Or, should I look for anything specific?
Can I use an eye dropper instead of a pipette/baster?
Thanks.
2
Op
Okay so
1st. You can use whatever mason jar you have however you need room to work and swirl the 2 layers together without it spilling out of the jar. So it can’t be full or you have no room to mix.
2nd. Any mason jar is fine you could even use a pickle jar or a patron bottle. Since the lye has time to cool before you put it in your extracting jar you don’t need to worry about it being heat resistant glass.
3rd. Ive heard of people using them however id recommend against it. Naphtha has the ability to melt plastic. You dont want that in your final product. Id recommend taking the time to get a long glass pipette off amazon. They are 7 bucks and it will make all your future extractions easy
3
hey thanks, that clears it up
3
hey,
While making lye water, I used a wooden spoon to stir the water as I was adding lye and the solution kind of turned black. I think it’s probably the wood from the spoon. Is it safe to use? If it’s unsafe, can I just pour the lye water down the drain? (50g lye in 375ml water).
Apparently, it takes a long ass time for this thing to cool to room temp. Some soap making folks seem to use some ice cubes in the water before adding lye into it. What do you think about it?
Thanks.
4
Op
Lye is drain cleaner so actually its ment to pour down your sink. Id start over and use a metal spoon maybe your wood one had some stain on it that turned you lye that color. Also it doesn’t take that long to cool. Maybe and hour? You can speed up the process by putting it in your fridge to cool down. I wouldn’t use the ice cube method because then your water mesument will be way off when they melt.
5
Thanks again for guiding thru this.
I tried to extract the naptha layer but seems extremely difficult because the layer is very thin, expecially on a wide mouthed jar.
Tried using a 3ml pipette and got small quantities and it evaporates as soon as I put it in the cassarole dish. Turkey baster takes in a lot of naptha layer better but immediately spits it out, probably a bad piece.
A couple of times the black mix also came with it. (accidentally spilled a few drops on my hand, washed with water and then vinegar, hopefully it’ll be ok since it’s diluted.)
I stopped extracting and want to try tomorrow.
My hand is also kind of shaky. Is there anything I could do better?
Is it a good idea to add more naptha to the same solution and try to get at least 50-75% rather than trying to deal with such a thin layer?
6
Op
Because you went through all that trouble and had an error based on my typo if you message me privately with your address I’d be happy to ship you out a golden teacher spore seringe or spore print. My apologies i fixed the error. Its 75ml per 50g of bark. Let me know! Sorry about that. I read over it 5 times but guess I still missed something.
7
hey, no worries. You’ve more than compensated for some typo helping a lot of folks here. You have no reason to feel bad at all.
I guess I’ll just add more naptha now and keep it for one more day? I didn’t take out a lot in my last attempt, probably not more than 6-7ml.
8
Op
So since its sat for 24hr already id add the remaining naphtha and stir and separate 4 to 5 times then you should be good to take it out.
9
I tried adding 75ml, swirl and let it sit for a few more hours and extract the naptha but there were like may be just 20 small dots in the yield after refrigeration.
Apparantely, the main problem was the jar was too wide. I’ll try again with better specs.
How do I dispose of the bark? It seems it’s become a solid lump by now. just mixing it and pouring it down the toilet in multiple flushes a good idea? Not sure if it’ll wash down the sink.
10
Op
I pour it in the toilet. Its natural bark and lye which is drain cleaner so no harm. Also I’ve never had a problem with mason jars. Remember that its 75ml of naphtha per 50g of mhrb. So if your doing 100g you need 150ml of naphtha. Ive received lots of messages from people telling me how successful they were with there extraction. Also remember that quality bark is key. Most mhrb companies are bunk and won’t have good yields. You really need to get the best bark you can find and there’s many good vendors out there! Good luck and keep trying! Don’t give up try the tek again and make sure you have bark from a good highly-rated vendor.
6
Op
I just found a typo in my write up and I apologize. Its 75ml of naphtha per 50g mhrb. So if you’re doing 100g of bark use double. Fuck! Can’t believe i didn’t see that. Sorry about the error. If you’re doing 100g use 150ml of naphtha that should change everything for you.
1
[deleted]
I saw a tek exactly like this one on YouTube but he put the jar in a pot of hot water and changed the water out every time he mixed up the two layers, keeping the jar warm. Is this necessary?
__Reply
2
Op
Absolutely not. Dmt is perfectly soluble in room temperature naphtha. As long as its not freezing g in your house you won’t need to warm it up or keep it warm.
3
[deleted]
Thanks!
__Reply
1
Question: what happens if you are piping up the naptha and do get little bits of the dark stuff? Will this ruin the pull/need to throw out? Is there a way to save it after it’s been in the freezer?
2
Op
So you dont want any black stuff in the final dish that you freeze. You can prop a book under your dish and let the black stuff or your “base” settle to one corner. Suck it out and then freeze your dish.
3
If it’s already been frozen with a few black bits can I scrape everything back into like a shot glass, add a bit of naptha, let it settle and pull again…this time leaving black bits behind?
4
Op
Absolutely! It’s called a revap. Some people do it after the first initial pull anyway just to get more of the plant fats out. Get 50ml of room temp naphtha and scrape all your product into it. After its desolves pour it back into your clean pyrex dish to freeze leaving behind the bad stuff. Also going forward i highly recommend getting a 7 dollar pipette off amazon. It will come in handy so much on future extractions and eliminate the current issue you’re having. A pipette give you way better control and suction with a smaller tip that won’t allow the black layer to come up as easy. 🙂 let me know how it goes for ya!
5
Thank you so much 🥰
1
So do you not have to cook the the DMT water mixture? I always thought this was a necessary step but you don’t mention it in this extraction.
2
Op
Not nessasary with this tek. People do it in other teks involving salts an vinegar. This will give you the same results as those with far less labor.
3
Awesome
1
Would you add any salt to the water first before the lye? If so how much would you commend? Thanks!
2
Op
No don’t add any salt. Salt and vinegar mixes are for teks that don’t use lye. Lye is acidic and is what removes the spice from the bark. There are other teks like Gordo tek that use vinegar and salt because they are using lye for the acidity.
1
Also how much water should be used for 50g of powder?
2
Op
I you can cut the recipe in half if you’re only using half of the bark.
3
Dang a few other teks and people I asked said to use same amount of water… I think it will be ok tho.
4
Op
Really depends on the tek. They are all different in there own way. For this tek I highly recommend to keep it simple and not add the same amount of water. However feel free to experiment and please let me know how it turns out. If you get the same results then why use more of the precious resource of water ya know🙂 ive always cut my ingredients in half and have always ended up with the same 10% return on my bark. Good luck👍
1
Thank you so so so much for making this guide! As a first timer, it was super easy to follow and gave me a good base knowledge of the process. I gained the confidence needed to continue this hobby.
2
Op
Awesome😁😁😁 glad it helped a few people out! Now since you have your first extraction under your belt you can explore other teks and have a better understanding of why people use different ingredients. Theres a million ways to do something but ultimately they all are trying to achieve the same goal. Good luck and best wishes going forward🍄
1
Extraction Cub
Can I substitute heptane for naphtha in this tek?
2
Op
Absolutely. Thats what I recommend for this tek but heptane will work the same🙂
1
You’re such a blessing, here’s to a journey I’ll be starting soon!
2
Op
Good luck! If you have any questions shoot me a dm😉
1
I am very thrilled to try out your method as I have not tried any method without the necessity of cooking the MRHB before hand - with my setup that would help immensely if I could pull this through. (Until a slowcooker arrives)
Is there anyway you could check my set-up through my latest posts and help me out?
2
Op
Sure no problem. Ive always found the slow cooker methods pick up way to much plant fat and makes the final product really harsh. Theres no spice in the fats so why pull that out with the spice too? This method is full proof and very simple with minimal tools needed. It my go to tek that has never let me down. Ill give your post a look🙂
1
Funny, I was reading your list and it’s almost exactly what was in the guide I was making for myself. Super helpful, thank you. A tip ’o the cap.
2
Op
Awesome! Glad it helped out. Great minds think alike😁
1
This is the tech I have been waiting to see released. Simpler to follow and execute, all the others repeatedly doing pulls seems too inefficient and risky when dealing with lye, the solvent must be allowed th time to pull the DMT out of the polarized aqueous solution, it sure doesn’t want to be stuck in with the water base solution. One pull over doing three or even more makes 100% sense. I don’t see vinegar being used to speed up the process, and patience is a virtue, so even if I had to soak the powdered MHRB for 48 hours isn’t a problem, unless that would leach out fats I don’t need or want. I’m going to use heptane as it’s already on hand, just need the Lye and half gallon mason jar, then I’ll use a 25 ml pipette to draw off the heptane, then freeze and save the heptane for the second pull. But this tech relies on contact time with the NP solvent…heptane should be more selective then naphtha is, but from what I have read heptane likes to be kept at least warm during the contact time period…any opinions are welcome..
1
Excellently explained. For step 1, instead of measuring the water by volume requiring an inaccurate millilitre scale, it is probably easier to do by weight, as 1ml water weights exactly 1g, so measuring 750g of water is easier and more accurate.
2
Op
Interesting I never thought of it that way. Thanks for the input! I’ll be sure to note that down on my next extraction.
1
Would it be too difficult to separate the layers if this was split into 2, 1 quart Mason jars? The 1/2 gallon Mason jars are expensive or say not for canning.
__
2
Op
So I usually buy a 6 pack of half gallon mason jars at winco foods for about 11 bucks. So really not that expensive. Also since we’re not working with heat in the tek they don’t have to hold up to any extreme temperatures. However this tek was just if youre going to do 100g mhrb. If your wanting to do like 50g then I’d go with the smaller pint jars so its easier to Siphon your naptha layer. You could also use a talk skinny glass (like a see through flower vase) that you can find at a goodwill or second hand store. Doesn’t have to be heat proof cause you’re allowing the lye to cool before putting it in the jar with the bark.
__
3
I didn’t even think about that part of the step.
I just looked online and you’re right they are cheap. I never see those in my grocery stores, only quart jars. Google says Walmart has em, but I’m not going to that disease barn in a pandemic. I’ve got plenty of quart and maybe a couple pint.
Thanks for the write up, and advice!
__
4
Op
Absolutely! quart jars and pint jars will work i just prefer the half gallons cause of the extra space i have to work with. Best of luck if any other questions come up let me know🍄
__
5
Cool. Sounds fairly straightforward then. My only concern is getting that top layer off without any lye. But I guess being careful and not too greedy to get every last drop is ok.
__
6
Op
I would 100% recommend you spend the money and get a glass pipette off amazon they go for 7 to 15 dollars. I would do that it made siphoning so much easier and accurate. I’m able to get every last bit of naphtha with the pipette. The lye is in the dark layer so as long as you don’t suck up the black layer you will be 100% hood
__
7
Already got one, had the same thoughts. I’ve used a turkey baster for food, their is no real accuracy there.
Cool cool, thanks again great work and advice.
__
8
Op
No problem! Glad I could help!
__
1
MIXING/SWIRLING Naptha technique… This step little fuzzy, ‘swirling’ 1/2gal jar till mixed? Also fuzzy, since not wanting to pull up any lye solution, could u add more Naptha n pull 2nd time? (OR PULL up some lye solution n transfer to more narrow jar, let separate n pull again to get all?) PS:WHAT is best Mimosa bark peeps source in USA? Then which Mimosa source country is best, TX!
__
2
Op
Have you ever seen a fancy person with a wine glass? They hold it at the bottom and swirl the glass around to mix up their wine. You can do the same thing with liquid in a mason jar, you just have to hold the top of the jar to make that same motion because a mason jar doesn’t have that little stick on the bottom like a wine glass 😄 also not pulling up any lye solution is really easy and not something I’d worry about. I do however recommend that you spend the 7 to 15 dollars on a glass pipette off amazon. It gives you a very controlled precise suction versus a turkey baster. I use my pipette all the time and never have any issues. I’m able to get all my naphtha up no problem. As for your other questions were not allowed to talk sources in the group but if you shoot me a direct message we can talk. Hope this helped ya out.
__
1
One question about the mixing process. When I mix it until the two layers become one, within just a few minutes they have separated again. Should I mix it every hour or so?
__
2
Op
They do separate pretty quick however I stick to every 4 to 6 hours. We dont wanna over mix and cause emultions.
__
3
I have yielded over two grams from 100g MHRB and your tek. Thank you!
__
4
Op
Fantastic experience isnt it!? I usually get 2g myself! Glad I could help lead another to success! Great work😉
__
1
I have bark but it seems to have the outside part will it still work ??
__
2
Op
It needs to be MHRB (mimosa hostilis root bark). There are plenty of vendors online that are reliable and have good quality. Shoot me a dm if you wanna talk more about it.
__
1
Does the naphtha evaporate off completely? Or does it coat the crystals in residue?
__
2
Op
Once you dry your crystals the naphtha will be evaporated completely. Thats why its important to let your crystals dry for a few hours.
A harm reduction focused subreddit for discussing the processes involved in the extraction and consumption of DMT and Ayahuasca, as well as a central repository for extraction guides and ingestion methods. Remember to flair your posts and choose an appropriate user flair. If this is your first time please check out the sticky for beginners .
- Extraction Tek
- ROA Method
- Equipment Checks/Discussion
- Solvent SDS/Evap Tests
- Experiments & Research
- Ayahuasca Creation/Ingestion
- Trip Report Weekends
- Meme Weekends
- Media & Art Weekends
- Meta
- Mescaline Extraction/ROI
- Harmalas/MAOI Extraction
- 5-MeO-DMT & Bufo Plant Extraction/ROI
- Mod Post/Announcement
Friendly Communities
© 2026 rcanzlovar.com | About | Contact | Privacy Policy |
![]()